SAFETY GUIDES THE PROCESS. ALWAYS.

Safety Talks

We are committed to construction safety. It is a commitment and the first core value that we have built into our culture.

Fire Prevention Week

Oct 5, 2026

October 4th through the 10th is National Fire Prevention Week. This year, the theme is “Charge Into Fire Safety: Safe Charging Is a Superpower.” The theme is about lithium-ion batteries. The goal is to learn how to safely charge, use, transport, store, and inspect the lithium-ion batteries that power the tools and equipment you use.

Lithium-ion batteries store a large amount of energy in a small package. If a battery is damaged, defective, exposed to extreme temperatures, or improperly charged, it can undergo thermal runaway. That’s a chain reaction inside the battery that causes it to heat up very quickly. The result can be a fire with dangerous smoke and flammable gases. Let’s talk about how to work with batteries safely.

Before charging or using a battery, inspect it. Don’t use or charge one that’s cracked, crushed, punctured, swollen, leaking, or has other damage. Don’t attempt to open, modify, or repair a lithium-ion battery yourself.

Use a designated charging area. If your jobsite has a battery-charging area, use it. Keep charging areas away from combustible materials and don’t put them close to exits, walkways, or access routes.

Charge safely. Use the charger that came with the battery or one approved by the manufacturer. Incompatible chargers can damage batteries and cause fires. Never use an improvised connector or cable to connect a battery to a charger. Whenever possible, charge on a non-flammable surface like steel or concrete. Don’t charge on soft surfaces or in small, enclosed spaces that can trap heat.

Don’t leave a fully-charged battery plugged in. Follow the manufacturer’s charging instructions and unplug the battery or device when it’s fully charged unless the manufacturer specifically directs otherwise.

Construction work exposes batteries to conditions that can damage them. Batteries can be dropped, crushed, punctured, exposed to water, or left in extreme heat or cold. Lithium-ion batteries are dangerous when they’re physically damaged. If a battery is punctured, cut open, or crushed, a fire is very likely. Generally, batteries shouldn’t be used, stored, or charged when the air or battery temperature is lower than 32 °F or higher than 110 °F. Check the battery or the manual for specific temperatures. Don’t leave batteries in a hot vehicle, in direct sunlight, or next to heaters or other heat sources. Don’t charge batteries when they’re outside the manufacturer’s specified temperature range. Protect spare batteries while transporting and storing them. Keep them dry and protected from physical damage, and follow the manufacturer’s storage instructions. Don’t store large numbers of batteries in the same place.

SAFETY REMINDER: Remove the batteries from cordless tools before you change blades, bits, or cutters.

Safety Meeting Outlines, Inc. Safety Meeting Outlines. Safety Meeting Outlines, Inc., www.safetymeetingoutlines.com/. Accessed 24 Aug. 2026.

Contact Us Today

Quandel Enterprises can help you achieve your commercial construction goals.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
This field is hidden when viewing the form
This field is hidden when viewing the form
This field is hidden when viewing the form
This field is hidden when viewing the form

Check Out More Articles

Read more of our informational articles below!