Forklift training will cover:
- Controls and instruments: what they do, how they work, and what they mean
- Steering and maneuvering: how to handle the forklift safely
- Capacity: what the rated capacity is and how to determine if a load is within that limit
- Visibility: how loads can restrict your view • Forks and attachments: their use and limitations
- Inspections: what to look for before use • Refueling or batteries: how to refuel or how and where to change and charge batteries
- Operating limitations and warnings: what’s in the operator’s manual and how it applies to you
Understand how a load will affect the forklift. Make sure loads are stable, properly positioned, and within the truck’s rated capacity. Keep the load as close to the back of the forks as practical, and don’t handle a load that is unstable or likely to shift or fall. Remember that the load will affect the forklift’s stability, especially when the load is raised. Keep the forks as low as practical while traveling.
Be aware of your environment. The jobsite changes constantly. You have to understand and adapt to the actual conditions where you operate the lift. Before moving, check your path for workers, vehicles, materials, debris, uneven or slippery surfaces, ramps, grades, restricted areas, and overhead obstructions. Watch for overhead power lines and maintain the required clearance.
Watch out for people nearby. Never assume that people see you or know where you’re going. If the load blocks your forward view, follow your training, such as traveling in reverse, when appropriate. Keep the forks low, slow down, and use the horn where your view is obstructed and where people or other vehicles may be nearby.
Protect yourself and others. Wear the seat belt. Never jump from a forklift that’s tipping over. If it’s a stand-up model, then you should step backward. Never let anyone stand or walk under an elevated load or raised forks. And never let anyone ride on the load or the forks. When you park a forklift, lower the forks, put the controls in neutral positions, set the parking brake, and shut down the forklift.
SAFETY REMINDER: Like a forklift, your back has a maximum lifting capacity. Never lift more than you can handle safely!
























































