At the end of your shift, after operating heavy equipment, how you leave the machine can affect the safety of the workers who remain on the jobsite, the public passing nearby, and the crew and operators who work the next day or next shift. Always leave the machine in a safe, secured, and stable condition.
Choose a safe parking location. When you park:
- Don’t create a hazard for workers, vehicles, or the public,
- Don’t cause people to walk under the boom or around the machine,
- Don’t block a road, sidewalk, travel route, access point, or work area, and
- Don’t park too close to an excavation, a trench, or the bank of a creek or lake where the edge could give way and the machine could fall in.
Think about the condition of the ground you’re leaving the equipment on. Make sure the ground is stable. Avoid areas where mud, standing water, ice, debris, a slope, or other conditions could make it difficult or dangerous to get to the machine or into the cab. Rain or other weather changes can affect the condition of the parking area. Report any changing conditions that could affect the machine’s stability, cause it to sink or get stuck, or create other issues.
By securing equipment, you’re preventing uncontrolled movement. Never leave a raised bucket, blade, dump body, or attachment where it could unexpectedly come down or where someone could walk or work under it. Lowering or properly blocking these components helps prevent struck-by and caught-between accidents.
Don’t let the equipment become a hazard. When you park equipment at night, especially next to a road or highway or in an active construction area, take the time to set up lights, reflectors, and barricades so the machine is highly visible and doesn’t put drivers or others at risk.
Before you walk away from the machine:
- Move the equipment to a safe location. Set the parking brake.
- Lower blades, buckets, dump bodies, and attachments completely, or block them as required when they can’t be safely lowered.
- Place the controls in neutral.
- Shut off the engine and lock the door.
- Chock the wheels of wheeled equipment, especially if it’s parked on an incline.
- Follow the manufacturer’s shutdown and parking procedures for your specific machine.
- Prevent vandalism, tampering, and unauthorized access. After you’ve secured the equipment, place the keys in the designated location. Close gates, barriers, and other access controls to keep the public (especially children) away from the equipment and the work area.
SAFETY REMINDER
Keep three points of contact when you climb in and out of the cab
Safety Meeting Outlines, Inc. Safety Meeting Outlines. Safety Meeting Outlines, Inc., www.safetymeetingoutlines.com/. Accessed 1 Nov. 2026.
























































